Webcome to bona water

BN9-RO83

Material:SUS304,SUS316L
Max working pressure 1000Psi
Polished or sandblast external surface
The stainless steel membrane shell is the basic component of the reverse osmosis equipment. The material is made of 304 stainless steel seamless tube. It is divided into the end cap seal form: clamp type, flange type, built-in type; according to the water inlet mode: end-entry, side Progress.

  • PRODUCT DETAIL

  • Product Description

Material:SUS304,SUS316L
Max working pressure 1000Psi
Polished or sandblast external surface

Product Description

Victaulic-port type and Tri-clover port type Stainless Steel RO Membrane Housing

Material:SUS304,SUS316L
Max working pressure 1000Psi
Polished or sandblast external surface
The stainless steel membrane shell is the basic component of the reverse osmosis equipment. The material is made of 304 stainless steel seamless tube. It is divided into the end cap seal form: clamp type, flange type, built-in type; according to the water inlet mode: end-entry, side Progress. The length is matched with the number of reverse osmosis membrane modules; the inside and outside of the product are polished, beautiful and practical, and the pressure is used to meet the normal operating pressure requirements of the reverse osmosis system. Main technical characteristics
Withstand voltage: 2.0~2.5MPa
Inlet mode: water at both ends, water on both sides
Structure: standard spare parts, easy to disassemble
Sealability: withstand voltage test
The structure of the two ends: clamp type, card type, inner spring type.
Main performance characteristics
The 4040 membrane shell is available in both seam and seamless, made of SUS304 stainless steel. Both ends are sealed with ABS head and silicone O-ring, high sealing performance and long service life.
8040 membrane shell: two kinds of ferrule sleeve and end cap type, made of SUS304 seamless stainless steel tube, good sealing performance, high pressure resistance, no aging, convenient installation and cleaning, working pressure (Mpa): 4.0. The inlet and outlet of the membrane shell can be imported (out) or side-in (out) according to customer requirements. Stainless steel membrane shells are available in 2.5-inch, 4-inch, 8-inch, etc.
1.4 inch RO membrane shell has 1 core, 2 core, 3 core, 4 core and other series.
2. The membrane shell tube is divided into two types: a seamed tube and a seamless tube.
The seamed pipe is automatically welded, the weld is even and smooth, and the inner and outer surfaces are mirror-finished. The pressure test is carried out before leaving the factory, and the pressure is up to 16kg;
The seamless tube is directly pulled out with the forging blank, the wall thickness is uniform, and it is not easy to leak water. The inner and outer surfaces are mirror-finished, and the pressure test is carried out before leaving the factory, and the pressure reaches 25kg.
3. The inlet and outlet connection modes are side-in and out-end, and end-in and out; the specifications are 6 points x 4 points and 4 points x 4 points.
4. Head material is ABS, stainless steel.

Inquiry

Skype

WhatsApp

WangWang

QQ
Email me

Mail to us